Skip to content

Instantly share code, notes, and snippets.

@avimoondra

avimoondra/Gemfile

Last active March 12, 2018 03:46
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save avimoondra/4d90eb34dedcb3235f815adead80bb8b to your computer and use it in GitHub Desktop.
Save avimoondra/4d90eb34dedcb3235f815adead80bb8b to your computer and use it in GitHub Desktop.
Download ZIP
Templates for testing in Rails...
Raw
Gemfile
group :development, :test do
gem 'byebug', platforms: [:mri, :mingw, :x64_mingw]
gem 'guard'
gem 'guard-shell'
gem 'pry-stack_explorer'
gem 'pry-byebug'
gem 'rubocop'
gem 'rubocop-rspec'
end
group :test do
gem 'capybara', '~> 2.13.0'
gem 'selenium-webdriver'
gem 'webmock'
gem 'factory_bot_rails'
gem 'rspec-rails'
gem 'guard-rspec'
gem 'launchy'
gem 'database_cleaner', require: false
gem 'rspec_junit_formatter'
gem 'codecov', require: false
gem 'fakeredis', github: 'guilleiguaran/fakeredis', require: false
gem 'timecop'
end
group :development do
gem 'spring-commands-rspec'
gem 'listen', '>= 3.0.5', '< 3.2'
gem 'spring'
gem 'spring-watcher-listen', '~> 2.0.0'
end
Raw
rails_helper.rb
# This file is copied to spec/ when you run 'rails generate rspec:install'
require 'spec_helper'
ENV['RAILS_ENV'] ||= 'test'
require File.expand_path('../../config/environment', __FILE__)
# Prevent database truncation if the environment is production
abort("The Rails environment is running in production mode!") if Rails.env.production?
require 'rspec/rails'
# Add additional requires below this line. Rails is not loaded until this point!
#
require 'capybara/rspec'
require 'database_cleaner'
# Requires supporting ruby files with custom matchers and macros, etc, in
# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
# run as spec files by default. This means that files in spec/support that end
# in _spec.rb will both be required and run as specs, causing the specs to be
# run twice. It is recommended that you do not name files matching this glob to
# end with _spec.rb. You can configure this pattern with the --pattern
# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
#
# The following line is provided for convenience purposes. It has the downside
# of increasing the boot-up time by auto-requiring all files in the support
# directory. Alternatively, in the individual `*_spec.rb` files, manually
# require only the support files necessary.
#
# Dir[Rails.root.join('spec/support/**/*.rb')].each { |f| require f }
# Checks for pending migrations and applies them before tests are run.
# If you are not using ActiveRecord, you can remove this line.
ActiveRecord::Migration.maintain_test_schema!
if ENV['CI'] == 'true'
require 'simplecov'
SimpleCov.start do
dirs = %w(/bin/ /db/ /spec/ /vendor/ /coverage/ /scripts/ /log/ /config/ /public/ /app/lib/mailers/previews/)
dirs.each do |dir|
add_filter dir
end
end
Rails.application.eager_load!
require 'codecov'
SimpleCov.formatter = SimpleCov::Formatter::Codecov
end
# generate faker data deterministically
Faker::Config.random = Random.new(42)
RSpec.configure do |config|
# Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
# config.fixture_path = "#{::Rails.root}/spec/fixtures"
# If you're not using ActiveRecord, or you'd prefer not to run each of your
# examples within a transaction, remove the following line or assign false
# instead of true.
config.use_transactional_fixtures = false
# RSpec Rails can automatically mix in different behaviours to your tests
# based on their file location, for example enabling you to call `get` and
# `post` in specs under `spec/controllers`.
#
# You can disable this behaviour by removing the line below, and instead
# explicitly tag your specs with their type, e.g.:
#
# RSpec.describe UsersController, :type => :controller do
# # ...
# end
#
# The different available types are documented in the features, such as in
# https://relishapp.com/rspec/rspec-rails/docs
config.infer_spec_type_from_file_location!
# Filter lines from Rails gems in backtraces.
config.filter_rails_from_backtrace!
# arbitrary gems may also be filtered via:
# config.filter_gems_from_backtrace("gem name")
config.include FactoryBot::Syntax::Methods
Capybara.register_driver :selenium_chrome do |app|
client = Selenium::WebDriver::Remote::Http::Default.new
client.read_timeout = 5*60 # default 60 seconds
Capybara::Selenium::Driver.new(app, browser: :chrome, http_client: client)
end
Capybara.javascript_driver = :selenium_chrome
config.before(:suite) do
if config.use_transactional_fixtures?
raise(<<-MSG)
Delete line `config.use_transactional_fixtures = true` from rails_helper.rb
(or set it to false) to prevent uncommitted transactions being used in
JavaScript-dependent specs.
During testing, the app-under-test that the browser driver connects to
uses a different database connection to the database connection used by
the spec. The app's database connection would not be able to access
uncommitted transaction data setup over the spec's database connection.
MSG
end
DatabaseCleaner.clean_with(:truncation)
end
config.before(:each) do
DatabaseCleaner.strategy = :transaction
end
config.before(:each, js: true) do
# DatabaseCleaner.strategy = :truncation
# :rack_test driver's Rack app under test shares database connection
# with the specs, so continue to use transaction strategy for speed.
driver_shares_db_connection_with_specs = Capybara.current_driver == :rack_test
unless driver_shares_db_connection_with_specs
# Driver is probably for an external browser with an app
# under test that does *not* share a database connection with the
# specs, so use truncation strategy.
DatabaseCleaner.strategy = :truncation
end
end
config.before(:each) do
DatabaseCleaner.start
end
config.append_after(:each) do
DatabaseCleaner.clean
end
end
Raw
spec_helper.rb
# This file was generated by the `rails generate rspec:install` command. Conventionally, all
# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
# The generated `.rspec` file contains `--require spec_helper` which will cause
# this file to always be loaded, without a need to explicitly require it in any
# files.
#
# Given that it is always loaded, you are encouraged to keep this file as
# light-weight as possible. Requiring heavyweight dependencies from this file
# will add to the boot time of your test suite on EVERY test run, even for an
# individual file that may not need all of that loaded. Instead, consider making
# a separate helper file that requires the additional dependencies and performs
# the additional setup, and require it from the spec files that actually need
# it.
#
# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
RSpec.configure do |config|
# rspec-expectations config goes here. You can use an alternate
# assertion/expectation library such as wrong or the stdlib/minitest
# assertions if you prefer.
config.expect_with :rspec do |expectations|
# This option will default to `true` in RSpec 4. It makes the `description`
# and `failure_message` of custom matchers include text for helper methods
# defined using `chain`, e.g.:
# be_bigger_than(2).and_smaller_than(4).description
# # => "be bigger than 2 and smaller than 4"
# ...rather than:
# # => "be bigger than 2"
expectations.include_chain_clauses_in_custom_matcher_descriptions = true
end
# rspec-mocks config goes here. You can use an alternate test double
# library (such as bogus or mocha) by changing the `mock_with` option here.
config.mock_with :rspec do |mocks|
# Prevents you from mocking or stubbing a method that does not exist on
# a real object. This is generally recommended, and will default to
# `true` in RSpec 4.
mocks.verify_partial_doubles = true
end
# This option will default to `:apply_to_host_groups` in RSpec 4 (and will
# have no way to turn it off -- the option exists only for backwards
# compatibility in RSpec 3). It causes shared context metadata to be
# inherited by the metadata hash of host groups and examples, rather than
# triggering implicit auto-inclusion in groups with matching metadata.
config.shared_context_metadata_behavior = :apply_to_host_groups
# The settings below are suggested to provide a good initial experience
# with RSpec, but feel free to customize to your heart's content.
# This allows you to limit a spec run to individual examples or groups
# you care about by tagging them with `:focus` metadata. When nothing
# is tagged with `:focus`, all examples get run. RSpec also provides
# aliases for `it`, `describe`, and `context` that include `:focus`
# metadata: `fit`, `fdescribe` and `fcontext`, respectively.
config.filter_run_when_matching :focus
# Allows RSpec to persist some state between runs in order to support
# the `--only-failures` and `--next-failure` CLI options. We recommend
# you configure your source control system to ignore this file.
config.example_status_persistence_file_path = "spec/examples.txt"
# Limits the available syntax to the non-monkey patched syntax that is
# recommended. For more details, see:
# - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
# - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
# - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
config.disable_monkey_patching!
# Many RSpec users commonly either run the entire suite or an individual
# file, and it's useful to allow more verbose output when running an
# individual spec file.
if config.files_to_run.one?
# Use the documentation formatter for detailed output,
# unless a formatter has already been configured
# (e.g. via a command-line flag).
config.default_formatter = "doc"
end
# Print the 10 slowest examples and example groups at the
# end of the spec run, to help surface which specs are running
# particularly slow.
# config.profile_examples = 10
# Run specs in random order to surface order dependencies. If you find an
# order dependency and want to debug it, you can fix the order by providing
# the seed, which is printed after each run.
# --seed 1234
config.order = :random
# Seed global randomization in this process using the `--seed` CLI option.
# Setting this allows you to use `--seed` to deterministically reproduce
# test failures related to randomization by passing the same `--seed` value
# as the one that triggered the failure.
Kernel.srand config.seed
end
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment