Skip to content

Instantly share code, notes, and snippets.

@iamkevinv
Forked from dougalcampbell/NeoPixelTest.ino
Last active April 22, 2016 06:35
Show Gist options
  • Save iamkevinv/51b397fa05cfbd5e91c1 to your computer and use it in GitHub Desktop.
Save iamkevinv/51b397fa05cfbd5e91c1 to your computer and use it in GitHub Desktop.
Example of driving an Adafruit NeoPixel Ring with the Digispark Arduino-compatible board
#include <Adafruit_NeoPixel.h>
#define PIN 1
#define STRIPSIZE 16
// Parameter 1 = number of pixels in strip
// Parameter 2 = pin number (most are valid)
// Parameter 3 = pixel type flags, add together as needed:
// NEO_KHZ800 800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
// NEO_KHZ400 400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
// NEO_GRB Pixels are wired for GRB bitstream (most NeoPixel products)
// NEO_RGB Pixels are wired for RGB bitstream (v1 FLORA pixels, not v2)
Adafruit_NeoPixel strip = Adafruit_NeoPixel(STRIPSIZE, PIN, NEO_GRB + NEO_KHZ800);
void setup() {
strip.begin();
strip.setBrightness(25); // Lower brightness and save eyeballs!
strip.show(); // Initialize all pixels to 'off'
}
void loop() {
// Some example procedures showing how to display to the pixels:
colorWipe(strip.Color(0,0,0), 25); // Black
colorWipe(strip.Color(64, 0, 0), 100); // Red
colorWipe(strip.Color(0, 64, 0), 100); // Green
colorWipe(strip.Color(0, 0, 64), 100); // Blue
colorWave(75);
colorWipe(strip.Color(0,0,0), 100); // Black
rainbow(15);
colorWipe(strip.Color(0,0,0), 100); // Black
rainbowCycle(15);
colorWipe(strip.Color(0,0,0), 100); // Black
colorWave(30);
}
// Fill the dots one after the other with a color
void colorWipe(uint32_t c, uint8_t wait) {
for(uint16_t i=0; i<strip.numPixels(); i++) {
strip.setPixelColor(i, c);
strip.show();
delay(wait);
}
}
void rainbow(uint8_t wait) {
uint16_t i, j;
for(j=0; j<256; j++) {
for(i=0; i<strip.numPixels(); i++) {
strip.setPixelColor(i, Wheel((i+j) & 255));
}
strip.show();
delay(wait);
}
}
// Slightly different, this makes the rainbow equally distributed throughout
void rainbowCycle(uint8_t wait) {
uint16_t i, j;
for(j=0; j<256*5; j++) { // 5 cycles of all colors on wheel
for(i=0; i< strip.numPixels(); i++) {
strip.setPixelColor(i, Wheel(((i * 256 / strip.numPixels()) + j) & 255));
}
strip.show();
delay(wait);
}
}
// Input a value 0 to 255 to get a color value.
// The colours are a transition r - g - b - back to r.
uint32_t Wheel(byte WheelPos) {
if(WheelPos < 85) {
return strip.Color(WheelPos * 3, 255 - WheelPos * 3, 0);
} else if(WheelPos < 170) {
WheelPos -= 85;
return strip.Color(255 - WheelPos * 3, 0, WheelPos * 3);
} else {
WheelPos -= 170;
return strip.Color(0, WheelPos * 3, 255 - WheelPos * 3);
}
}
/**
* ^ ^ ^
* ~~~~~ ColorWave ~~~~~
* V V V
*/
void colorWave(uint8_t wait) {
int i, j, stripsize, cycle;
float ang, rsin, gsin, bsin, offset;
static int tick = 0;
stripsize = strip.numPixels();
cycle = stripsize * 25; // times around the circle...
while (++tick % cycle) {
offset = map2PI(tick);
for (i = 0; i < stripsize; i++) {
ang = map2PI(i) - offset;
rsin = sin(ang);
gsin = sin(2.0 * ang / 3.0 + map2PI(int(stripsize/6)));
bsin = sin(4.0 * ang / 5.0 + map2PI(int(stripsize/3)));
strip.setPixelColor(i, strip.Color(trigScale(rsin), trigScale(gsin), trigScale(bsin)));
}
strip.show();
delay(wait);
}
}
/**
* Scale a value returned from a trig function to a byte value.
* [-1, +1] -> [0, 254]
* Note that we ignore the possible value of 255, for efficiency,
* and because nobody will be able to differentiate between the
* brightness levels of 254 and 255.
*/
byte trigScale(float val) {
val += 1.0; // move range to [0.0, 2.0]
val *= 127.0; // move range to [0.0, 254.0]
return int(val) & 255;
}
/**
* Map an integer so that [0, striplength] -> [0, 2PI]
*/
float map2PI(int i) {
return PI*2.0*float(i) / float(strip.numPixels());
}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment