Last active
June 5, 2020 01:50
-
-
Save JakeSays/ebc0e4c9cc9b89b4a167d0216d123585 to your computer and use it in GitHub Desktop.
OpenOCD debug logs
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ************** | |
| Session One started for MCU 1 | |
| ************** | |
| /usr/local/bin/openocd -c gdb_port 9001 -s /p/egym/azo/test/openocd -f /p/egym/azo/test/openocd/openocd.cfg -c tcl_port disabled -c telnet_port disabled -d3 | |
| 19:31:49: Debugging starts | |
| Open On-Chip Debugger 0.10.0+dev-gd8ac008-dirty (2020-05-29-22:19) | |
| Licensed under GNU GPL v2 | |
| For bug reports, read | |
| http://openocd.org/doc/doxygen/bugs.html | |
| Info : tcl server disabled | |
| Info : telnet server disabled | |
| Info : CMSIS-DAP: SWD Supported | |
| Info : CMSIS-DAP: FW Version = 03.25.01B6 | |
| Info : CMSIS-DAP: Serial# = ATML2748051800005579 | |
| Info : CMSIS-DAP: Interface Initialised (SWD) | |
| Info : SWCLK/TCK = 1 SWDIO/TMS = 1 TDI = 1 TDO = 1 nTRST = 0 nRESET = 1 | |
| Info : CMSIS-DAP: Interface ready | |
| Info : clock speed 2000 kHz | |
| Info : SWD DPIDR 0x2ba01477 | |
| Info : atsame54p20a.cpu: hardware has 6 breakpoints, 4 watchpoints | |
| Info : starting gdb server for atsame54p20a.cpu on 9001 | |
| Info : Listening on port 9001 for gdb connections | |
| Info : accepting 'gdb' connection on tcp/9001 | |
| Debugger attaching: halting execution | |
| target halted due to debug-request, current mode: Thread | |
| xPSR: 0x01000000 pc: 0x000002ec msp: 0x20012bc8 | |
| force hard breakpoints | |
| Info : SAM MCU: SAME54P20A (1024KB Flash, 256KB RAM) | |
| target halted due to debug-request, current mode: Thread | |
| xPSR: 0x01000000 pc: 0x000002ec msp: 0x20012bc8 | |
| target halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x000002ec msp: 0x20012bc8target halted due to debug-request, current mode: Thread | |
| xPSR: 0x01000000 pc: 0x000002ec msp: 0x20012bc8 | |
| target halted due to debug-request, current mode: Thread | |
| xPSR: 0x01000000 pc: 0x000002ec msp: 0x20012bc8 | |
| Info : SWD DPIDR 0x2ba01477 | |
| Error: Failed to read memory at 0xfffff000 | |
| ************** | |
| Session Two started for MCU2 | |
| ************** | |
| ************** | |
| Session One output after Two starts | |
| ************** | |
| Error: CMSIS-DAP transfer count mismatch: expected 2, got 1 | |
| CMSIS-DAP transfer count mismatch: expected 2, got 1Warn : target atsame54p20a.cpu is not halted (gdb fileio) | |
| Polling target atsame54p20a.cpu failed, trying to reexamine | |
| Error: CMSIS-DAP command CMD_DISCONNECT failed. | |
| Error: CMSIS-DAP command CMD_DISCONNECT failed. | |
| Error: CMSIS-DAP failed to connect in mode (1) | |
| Error: Could not find MEM-AP to control the core | |
| Examination failed, GDB will be halted. Polling again in 100ms | |
| Error: CMSIS-DAP failed to connect in mode (1) | |
| Error: CMSIS-DAP failed to connect in mode (1) | |
| Error: Failed to write memory and, additionally, failed to find out where | |
| Error: CMSIS-DAP failed to connect in mode (1) | |
| Error: CMSIS-DAP failed to connect in mode (1) | |
| Error: Failed to write memory and, additionally, failed to find out where | |
| Error: CMSIS-DAP failed to connect in mode (1) | |
| Error: CMSIS-DAP failed to connect in mode (1) | |
| Error: Failed to write memory and, additionally, failed to find out where | |
| Error: CMSIS-DAP failed to connect in mode (1) | |
| Error: CMSIS-DAP transfer count mismatch: expected 2, got 0 | |
| Info : SWD DPIDR 0xdeadbeef | |
| Error: CMSIS-DAP transfer count mismatch: expected 2, got 1 | |
| Error: CMSIS-DAP transfer count mismatch: expected 4, got 1 | |
| Error: CMSIS-DAP transfer count mismatch: expected 1, got 0 | |
| Info : SWD DPIDR 0xf0000040 | |
| Error: CMSIS-DAP transfer count mismatch: expected 2, got 4 | |
| Error: CMSIS-DAP transfer count mismatch: expected 4, got 1 | |
| Error: CMSIS-DAP transfer count mismatch: expected 3, got 0 | |
| Error: CMSIS-DAP transfer count mismatch: expected 2, got 1 | |
| Error: Failed to read memory at 0x00000000 | |
| Error: CMSIS-DAP transfer count mismatch: expected 4, got 0 | |
| Error: CMSIS-DAP failed to connect in mode (1) | |
| Error: Failed to read memory and, additionally, failed to find out where | |
| Error: CMSIS-DAP failed to connect in mode (1) | |
| Polling target atsame54p20a.cpu failed, trying to reexamine | |
| Error: CMSIS-DAP failed to connect in mode (1) | |
| Error: CMSIS-DAP failed to connect in mode (1) | |
| Error: Could not find MEM-AP to control the core | |
| Examination failed, GDB will be halted. Polling again in 300ms | |
| Polling target atsame54p20a.cpu failed, trying to reexamine | |
| Error: CMSIS-DAP failed to connect in mode (1) | |
| Info : SWD DPIDR 0x2ba01477 | |
| Error: CMSIS-DAP command CMD_DISCONNECT failed. | |
| Error: CMSIS-DAP command CMD_CONNECT failed. | |
| Error: CMSIS-DAP command CMD_DISCONNECT failed. | |
| Error: CMSIS-DAP command CMD_CONNECT failed. | |
| 19:32:34: The program has unexpectedly finished. | |
| 19:32:34: The process was ended forcefully. | |
| 19:32:34: Debugging has finished | |
| 19:32:34: /usr/local/bin/openocd crashed. | |
| ************** | |
| End Session One | |
| ************** | |
| ************** | |
| Session Two output | |
| ************** | |
| /usr/local/bin/openocd -c g /usr/local/bin/openocd -c gdb_port 9000 -s /p/egym/azo/test/openocd -f /p/egym/azo/test/openocd/openocd.cfg -d3 | |
| 19:32:26: Debugging starts | |
| Open On-Chip Debugger 0.10.0+dev-gd8ac008-dirty (2020-05-29-22:19) | |
| Licensed under GNU GPL v2 | |
| For bug reports, read | |
| http://openocd.org/doc/doxygen/bugs.html | |
| User : 13 0 options.c:63 configuration_output_handler(): debug_level: 3 | |
| User : 14 0 options.c:63 configuration_output_handler(): | |
| Debug: 15 0 options.c:187 add_default_dirs(): bindir=/usr/local/bin | |
| Debug: 16 0 options.c:188 add_default_dirs(): pkgdatadir=/usr/local/share/openocd | |
| Debug: 17 0 options.c:189 add_default_dirs(): exepath=/usr/local/bin | |
| Debug: 18 0 options.c:190 add_default_dirs(): bin2data=../share/openocd | |
| Debug: 19 0 configuration.c:42 add_script_search_dir(): adding /home/jake/.openocd | |
| Debug: 20 0 configuration.c:42 add_script_search_dir(): adding /usr/local/bin/../share/openocd/site | |
| Debug: 21 0 configuration.c:42 add_script_search_dir(): adding /usr/local/bin/../share/openocd/scripts | |
| Debug: 22 0 command.c:146 script_debug(): command - gdb_port 9000 | |
| Debug: 24 0 configuration.c:97 find_file(): found /p/egym/azo/test/openocd/openocd.cfg | |
| Debug: 25 1 configuration.c:97 find_file(): found /usr/local/bin/../share/openocd/scripts/interface/cmsis-dap.cfg | |
| Debug: 26 1 command.c:146 script_debug(): command - adapter driver cmsis-dap | |
| Debug: 28 1 command.c:352 register_command_handler(): registering 'cmsis-dap'... | |
| Debug: 29 1 command.c:352 register_command_handler(): registering 'cmsis-dap'... | |
| Debug: 30 1 command.c:352 register_command_handler(): registering 'cmsis_dap_vid_pid'... | |
| Debug: 31 1 command.c:352 register_command_handler(): registering 'cmsis_dap_serial'... | |
| Debug: 32 1 command.c:146 script_debug(): command - transport select swd | |
| Debug: 33 1 command.c:352 register_command_handler(): registering 'swd'... | |
| Debug: 34 1 configuration.c:97 find_file(): found /usr/local/bin/../share/openocd/scripts/target/atsame5x.cfg | |
| Debug: 35 1 configuration.c:97 find_file(): found /usr/local/bin/../share/openocd/scripts/target/swj-dp.tcl | |
| Debug: 36 1 command.c:146 script_debug(): command - transport select | |
| Debug: 37 1 command.c:146 script_debug(): command - transport select | |
| Debug: 38 1 command.c:146 script_debug(): command - transport select | |
| Debug: 39 1 command.c:146 script_debug(): command - transport select | |
| Debug: 40 1 command.c:146 script_debug(): command - swd newdap atsame54p20a cpu -irlen 4 -expected-id 0x0bc11477 | |
| Debug: 41 1 tcl.c:566 jim_newtap_cmd(): Creating New Tap, Chip: atsame54p20a, Tap: cpu, Dotted: atsame54p20a.cpu, 4 params | |
| Debug: 42 1 core.c:1484 jtag_tap_init(): Created Tap: atsame54p20a.cpu @ abs position 0, irlen 0, capture: 0x0 mask: 0x0 | |
| Debug: 43 1 command.c:146 script_debug(): command - dap create atsame54p20a.dap -chain-position atsame54p20a.cpu | |
| Debug: 44 1 command.c:352 register_command_handler(): registering 'atsame54p20a.dap'... | |
| Debug: 45 1 command.c:352 register_command_handler(): registering 'atsame54p20a.dap'... | |
| Debug: 46 1 command.c:352 register_command_handler(): registering 'atsame54p20a.dap'... | |
| Debug: 47 1 command.c:352 register_command_handler(): registering 'atsame54p20a.dap'... | |
| Debug: 48 1 command.c:352 register_command_handler(): registering 'atsame54p20a.dap'... | |
| Debug: 49 1 command.c:352 register_command_handler(): registering 'atsame54p20a.dap'... | |
| Debug: 50 1 command.c:352 register_command_handler(): registering 'atsame54p20a.dap'... | |
| Debug: 51 1 command.c:352 register_command_handler(): registering 'atsame54p20a.dap'... | |
| Debug: 52 1 command.c:352 register_command_handler(): registering 'atsame54p20a.dap'... | |
| Debug: 53 1 command.c:146 script_debug(): command - target create atsame54p20a.cpu cortex_m -endian little -dap atsame54p20a.dap | |
| Debug: 54 1 command.c:352 register_command_handler(): registering 'arm'... | |
| Debug: 55 1 command.c:352 register_command_handler(): registering 'arm'... | |
| Debug: 56 1 command.c:352 register_command_handler(): registering 'arm'... | |
| Debug: 57 1 command.c:352 register_command_handler(): registering 'arm'... | |
| Debug: 58 1 command.c:352 register_command_handler(): registering 'arm'... | |
| Debug: 59 1 command.c:352 register_command_handler(): registering 'arm'... | |
| Debug: 60 1 command.c:352 register_command_handler(): registering 'arm'... | |
| Debug: 61 1 command.c:352 register_command_handler(): registering 'arm'... | |
| Debug: 62 1 command.c:352 register_command_handler(): registering 'arm'... | |
| Debug: 63 1 command.c:352 register_command_handler(): registering 'tpiu'... | |
| Debug: 64 1 command.c:352 register_command_handler(): registering 'itm'... | |
| Debug: 65 1 command.c:352 register_command_handler(): registering 'itm'... | |
| Debug: 66 1 command.c:352 register_command_handler(): registering 'cortex_m'... | |
| Debug: 67 1 command.c:352 register_command_handler(): registering 'cortex_m'... | |
| Debug: 68 1 command.c:352 register_command_handler(): registering 'cortex_m'... | |
| Debug: 69 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 70 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 71 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 72 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 73 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 74 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 75 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 76 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 77 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 78 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 79 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 80 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 81 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 82 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 83 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 84 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 85 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 86 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 87 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 88 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 89 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 90 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 91 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 92 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 93 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 94 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 95 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 96 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 97 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 98 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 99 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 100 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 101 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 102 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 103 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 104 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 105 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 106 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 107 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 108 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 109 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 110 1 command.c:352 register_command_handler(): registering 'atsame54p20a.cpu'... | |
| Debug: 111 1 command.c:146 script_debug(): command - atsame54p20a.cpu configure -work-area-phys 0x20000000 -work-area-size 0x8000 -work-area-backup 0 | |
| Debug: 112 1 target.c:1978 target_free_all_working_areas_restore(): freeing all working areas | |
| Debug: 113 1 target.c:1978 target_free_all_working_areas_restore(): freeing all working areas | |
| Debug: 114 1 target.c:1978 target_free_all_working_areas_restore(): freeing all working areas | |
| Debug: 115 1 command.c:146 script_debug(): command - atsame54p20a.cpu configure -event reset-deassert-post | |
| atsame5 dsu_reset_deassert | |
| Debug: 116 1 command.c:146 script_debug(): command - reset_config srst_gates_jtag | |
| Debug: 118 1 command.c:146 script_debug(): command - adapter speed 2000 | |
| Debug: 120 1 core.c:1822 jtag_config_khz(): handle jtag khz | |
| Debug: 121 1 core.c:1785 adapter_khz_to_speed(): convert khz to interface specific speed value | |
| Debug: 122 1 core.c:1785 adapter_khz_to_speed(): convert khz to interface specific speed value | |
| Debug: 123 1 command.c:146 script_debug(): command - transport select | |
| Debug: 124 1 command.c:146 script_debug(): command - cortex_m reset_config sysresetreq | |
| Debug: 126 1 command.c:146 script_debug(): command - flash bank atsame54p20a.flash atsame5 0x00000000 0 1 1 atsame54p20a.cpu | |
| Debug: 128 1 command.c:352 register_command_handler(): registering 'atsame5'... | |
| Debug: 129 1 command.c:352 register_command_handler(): registering 'atsame5'... | |
| Debug: 130 1 command.c:352 register_command_handler(): registering 'atsame5'... | |
| Debug: 131 1 command.c:352 register_command_handler(): registering 'atsame5'... | |
| Debug: 132 1 tcl.c:1261 handle_flash_bank_command(): 'atsame5' driver usage field missing | |
| Debug: 133 1 command.c:146 script_debug(): command - reset_config none | |
| Debug: 135 1 command.c:146 script_debug(): command - cortex_m reset_config sysresetreq | |
| Debug: 137 1 command.c:146 script_debug(): command - atsame54p20a.cpu configure -event gdb-attach | |
| echo "Debugger attaching: halting execution" | |
| reset halt | |
| gdb_breakpoint_override hard | |
| Debug: 138 1 command.c:146 script_debug(): command - atsame54p20a.cpu configure -event gdb-detach | |
| echo "Debugger detaching: resuming execution" | |
| resume | |
| Info : 139 1 server.c:310 add_service(): Listening on port 6666 for tcl connections | |
| Info : 140 1 server.c:310 add_service(): Listening on port 4444 for telnet connections | |
| Debug: 141 1 command.c:146 script_debug(): command - init | |
| Debug: 143 1 command.c:146 script_debug(): command - target init | |
| Debug: 145 1 command.c:146 script_debug(): command - target names | |
| Debug: 146 1 command.c:146 script_debug(): command - atsame54p20a.cpu cget -event gdb-flash-erase-start | |
| Debug: 147 1 command.c:146 script_debug(): command - atsame54p20a.cpu configure -event gdb-flash-erase-start reset init | |
| Debug: 148 1 command.c:146 script_debug(): command - atsame54p20a.cpu cget -event gdb-flash-write-end | |
| Debug: 149 1 command.c:146 script_debug(): command - atsame54p20a.cpu configure -event gdb-flash-write-end reset halt | |
| Debug: 150 1 command.c:146 script_debug(): command - atsame54p20a.cpu cget -event gdb-attach | |
| Debug: 151 1 target.c:1440 handle_target_init_command(): Initializing targets... | |
| Debug: 152 1 semihosting_common.c:97 semihosting_common_init(): | |
| Debug: 153 1 command.c:352 register_command_handler(): registering 'target_request'... | |
| Debug: 154 1 command.c:352 register_command_handler(): registering 'trace'... | |
| Debug: 155 1 command.c:352 register_command_handler(): registering 'trace'... | |
| Debug: 156 1 command.c:352 register_command_handler(): registering 'fast_load_image'... | |
| Debug: 157 1 command.c:352 register_command_handler(): registering 'fast_load'... | |
| Debug: 158 1 command.c:352 register_command_handler(): registering 'profile'... | |
| Debug: 159 1 command.c:352 register_command_handler(): registering 'virt2phys'... | |
| Debug: 160 1 command.c:352 register_command_handler(): registering 'reg'... | |
| Debug: 161 1 command.c:352 register_command_handler(): registering 'poll'... | |
| Debug: 162 1 command.c:352 register_command_handler(): registering 'wait_halt'... | |
| Debug: 163 1 command.c:352 register_command_handler(): registering 'halt'... | |
| Debug: 164 1 command.c:352 register_command_handler(): registering 'resume'... | |
| Debug: 165 1 command.c:352 register_command_handler(): registering 'reset'... | |
| Debug: 166 1 command.c:352 register_command_handler(): registering 'soft_reset_halt'... | |
| Debug: 167 1 command.c:352 register_command_handler(): registering 'step'... | |
| Debug: 168 1 command.c:352 register_command_handler(): registering 'mdd'... | |
| Debug: 169 1 command.c:352 register_command_handler(): registering 'mdw'... | |
| Debug: 170 1 command.c:352 register_command_handler(): registering 'mdh'... | |
| Debug: 171 1 command.c:352 register_command_handler(): registering 'mdb'... | |
| Debug: 172 1 command.c:352 register_command_handler(): registering 'mwd'... | |
| Debug: 173 1 command.c:352 register_command_handler(): registering 'mww'... | |
| Debug: 174 1 command.c:352 register_command_handler(): registering 'mwh'... | |
| Debug: 175 1 command.c:352 register_command_handler(): registering 'mwb'... | |
| Debug: 176 1 command.c:352 register_command_handler(): registering 'bp'... | |
| Debug: 177 1 command.c:352 register_command_handler(): registering 'rbp'... | |
| Debug: 178 1 command.c:352 register_command_handler(): registering 'wp'... | |
| Debug: 179 1 command.c:352 register_command_handler(): registering 'rwp'... | |
| Debug: 180 1 command.c:352 register_command_handler(): registering 'load_image'... | |
| Debug: 181 1 command.c:352 register_command_handler(): registering 'dump_image'... | |
| Debug: 182 1 command.c:352 register_command_handler(): registering 'verify_image_checksum'... | |
| Debug: 183 1 command.c:352 register_command_handler(): registering 'verify_image'... | |
| Debug: 184 1 command.c:352 register_command_handler(): registering 'test_image'... | |
| Debug: 185 1 command.c:352 register_command_handler(): registering 'reset_nag'... | |
| Debug: 186 1 command.c:352 register_command_handler(): registering 'ps'... | |
| Debug: 187 1 command.c:352 register_command_handler(): registering 'test_mem_access'... | |
| Info : 188 5 cmsis_dap_usb.c:872 cmsis_dap_get_caps_info(): CMSIS-DAP: SWD Supported | |
| Info : 189 5 cmsis_dap_usb.c:852 cmsis_dap_get_version_info(): CMSIS-DAP: FW Version = 03.25.01B6 | |
| Info : 190 6 cmsis_dap_usb.c:837 cmsis_dap_get_serial_info(): CMSIS-DAP: Serial# = ATML2748051800005579 | |
| Info : 191 6 cmsis_dap_usb.c:965 cmsis_dap_swd_open(): CMSIS-DAP: Interface Initialised (SWD) | |
| Debug: 192 7 cmsis_dap_usb.c:1037 cmsis_dap_init(): CMSIS-DAP: Packet Size = 512 | |
| Debug: 193 7 cmsis_dap_usb.c:1050 cmsis_dap_init(): CMSIS-DAP: Packet Count = 4 | |
| Debug: 194 7 cmsis_dap_usb.c:1053 cmsis_dap_init(): Allocating FIFO for 3 pending HID requests | |
| Info : 195 8 cmsis_dap_usb.c:887 cmsis_dap_get_status(): SWCLK/TCK = 1 SWDIO/TMS = 1 TDI = 1 TDO = 1 nTRST = 0 nRESET = 1 | |
| Info : 196 10 cmsis_dap_usb.c:1107 cmsis_dap_init(): CMSIS-DAP: Interface ready | |
| Debug: 197 10 core.c:1785 adapter_khz_to_speed(): convert khz to interface specific speed value | |
| Debug: 198 10 core.c:1789 adapter_khz_to_speed(): have interface set up | |
| Debug: 199 11 core.c:1785 adapter_khz_to_speed(): convert khz to interface specific speed value | |
| Debug: 200 11 core.c:1789 adapter_khz_to_speed(): have interface set up | |
| Info : 201 11 core.c:1565 adapter_init(): clock speed 2000 kHz | |
| Debug: 202 11 openocd.c:141 handle_init_command(): Debug Adapter init complete | |
| Debug: 203 11 command.c:146 script_debug(): command - transport init | |
| Debug: 205 11 transport.c:239 handle_transport_init(): handle_transport_init | |
| Debug: 206 11 command.c:146 script_debug(): command - dap init | |
| Debug: 208 11 arm_dap.c:106 dap_init_all(): Initializing all DAPs ... | |
| Debug: 209 12 cmsis_dap_usb.c:927 cmsis_dap_swd_switch_seq(): JTAG-to-SWD | |
| Debug: 210 15 cmsis_dap_usb.c:730 cmsis_dap_swd_read_process(): SWD ack not OK @ 0 JUNK | |
| Debug: 211 15 command.c:626 run_command(): Command 'dap init' failed with error code -4 | |
| User : 212 15 command.c:692 command_run_line(): | |
| Debug: 213 15 command.c:626 run_command(): Command 'init' failed with error code -4 | |
| User : 214 15 command.c:692 command_run_line(): | |
| Debug: 215 15 target.c:1978 target_free_all_working_areas_restore(): freeing all working areas | |
| Error: 216 16 cmsis_dap_usb.c:545 cmsis_dap_cmd_DAP_Connect(): CMSIS-DAP failed to connect in mode (1) | |
| Error: 217 16 cmsis_dap_usb.c:562 cmsis_dap_cmd_DAP_Disconnect(): CMSIS-DAP command CMD_DISCONNECT failed. | |
| 19:32:26: /usr/local/bin/openocd exited with code 1 | |
| 19:32:38: Debugging has finished | |
| ************** | |
| End Session Two | |
| ************** |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment