Skip to content

Instantly share code, notes, and snippets.

@premek
Last active March 5, 2024 17:43
Show Gist options
  • Save premek/6e70446cfc913d3c929d7cdbfe896fef to your computer and use it in GitHub Desktop.
Save premek/6e70446cfc913d3c929d7cdbfe896fef to your computer and use it in GitHub Desktop.
Rename files in linux / bash using mv command without typing the full name two times
# Put this function to your .bashrc file.
# Usage: mv oldfilename
# If you call mv without the second parameter it will prompt you to edit the filename on command line.
# Original mv is called when it's called with more than one argument.
# It's useful when you want to change just a few letters in a long name.
#
# Also see:
# - imv from renameutils
# - Ctrl-W Ctrl-Y Ctrl-Y (cut last word, paste, paste)
function mv() {
if [ "$#" -ne 1 ] || [ ! -e "$1" ]; then
command mv "$@"
return
fi
read -ei "$1" newfilename
command mv -v -- "$1" "$newfilename"
}
@it6c65
Copy link

it6c65 commented Apr 14, 2020

There are even more flexible ways (in bash, at least), for example (here renaming .txt to .json):

$ touch config.txt
$ mv config.txt !#:1:s/txt/json

You can do it even shorter, all is for the flexible style of bash and similaires, that generally works in zsh too, repeating with your same example:

$ touch config.txt
$ mv !$ !#:1:s/txt/json

@jlevy
Copy link

jlevy commented Apr 14, 2020

Yeah, many ways to do this but would argue readline's Ctrl-W Ctrl-Y Ctrl-Y is cleanest since it's useful to know anyway and available almost anywhere. :)

Screen Recording 2020-04-13 at 06 43 PM

@alhirzel
Copy link

alhirzel commented Apr 14, 2020

I also want to point out roamer, where you can launch roamer . and then use $EDITOR to bulk edit multiple filenames at once. https://github.com/abaldwin88/roamer

@madprops
Copy link

Just thinking that if you want to call the mv command again when pressing up, after using it to change the name of a file, it will use the original file name, forcing the user to adjust the name, for instance if you mv'd zoo to zoo2 it will say 'mv zoo' on up arrow (history up), which can't be used without adjusting it - maybe something could be done like storing the last filename and editing it when using 'mv' without arguments, for instance 'mv' will show 'zoo2' ready to be edited

@immanuelfodor
Copy link

Welcome to HackerNews front page #1: https://news.ycombinator.com/item?id=22859935

@mjrosenb
Copy link

Since we seem to be jumping on the 'alternate solution' bandwagon, I'll point out that typing C-x C-e at a bash prompt will open the currently typed command in an $VISUAL or $EDITOR, and execute whatever is saved when the editor exits.

@rohan-mo
Copy link

C-x C-e gives me -bash: emacs: command not found

@vasergen
Copy link

you can use as well rename

@niderhoff
Copy link

C-x C-e gives me -bash: emacs: command not found

then you need to change $EDITOR to some editor that is installed on your system, I think?

@premek
Copy link
Author

premek commented Apr 14, 2020

Ctrl-W Ctrl-Y Ctrl-Y is good, I didn't know about that

@moviuro
Copy link

moviuro commented Apr 14, 2020

https://gist.github.com/premek/6e70446cfc913d3c929d7cdbfe896fef#file-mv-sh-L18 will fail with files that start with a dash:

$ mv -lol
toto
mv: invalid option -- 'l'
Try 'mv --help' for more information.

L18 should read:

command mv -v -- "$1" "$newfilename"

And also: https://news.ycombinator.com/item?id=22863551

@premek
Copy link
Author

premek commented Apr 14, 2020

@moviuro ok I updated it, thanks! And I removed the file call (I wanted to have nicer arror messages)

@anisse
Copy link

anisse commented Apr 14, 2020

Looks like we keep reinventing this :)

I made this in 2018 (https://github.com/lgommans/vinamer) and recently discovered this was a reinvention of a 2017 project (https://github.com/thameera/vimv).

It looks like it's a reinvention of the much older (2006) vidir (works with any $EDITOR) ; packaged in debian, ubuntu or fedora in the package moreutils, along with other very useful tools:
https://joeyh.name/code/moreutils/

@nablaone
Copy link

$ apropos rename
$ man rename

@Humandoodlebug
Copy link

Humandoodlebug commented Apr 14, 2020

Fish shell equivalent:
~/.config/fish/functions/mv.fish

function mv --wraps mv
  if [ (count $argv) -ne 1 -o ! -f "$argv[1]" ]
    command mv $argv
    return
  end

  set newfilename (bash -c 'read -ei "$1" newfilename && echo "$newfilename"' '' "$argv[1]")
  command mv -v -- "$argv[1]" "$newfilename"
end

@karekaa
Copy link

karekaa commented Apr 14, 2020

Just thinking that if you want to call the mv command again when pressing up, after using it to change the name of a file, it will use the original file name, forcing the user to adjust the name,

You think like this?
Anway, be aware that «history of arguments» are found by <ALT><.> (<ALT><Punctation>) so this:
~ $ touch zoo
~ $ mv <ALT><.><SPACE><ALT><.>

... will type out:
~ $ mv zoo zoo

... and by the way, continue <ALT><.> repeated times to get older «arguments»

@domyrtille
Copy link

@rohan-mo
-bash: emacs: command not found

Meaning you don't have emacs installed or the bin is not in your $PATH
Easiest way is to apt install emacs or brew install emacs

Other way will be to do something like that:
export EDITOR=vim if you have vim or replace vim with what you have installed

@cameronsstone
Copy link

cameronsstone commented Apr 14, 2020

Firstly, thank you - this is nice™.

zsh equivalent:

function mv() {
  if [ "$#" -ne 1 ] || [ ! -f "$1" ]; then
    command mv "$@"
    return
  fi

  newfilename="$1"
  vared newfilename
  command mv -v -- "$1" "$newfilename"
}

Kudos to Gilles 'SO- stop being evil' for StackExchange answer.

BTW, fish also has vared, so this should probably work for fish, too, and be lighter-weight than Humandoodlebug's excellent bash subshell solution.

@dbgrigsby
Copy link

Yeah, many ways to do this but would argue readline's Ctrl-W Ctrl-Y Ctrl-Y is cleanest since it's useful to know anyway and available almost anywhere. :)

Screen Recording 2020-04-13 at 06 43 PM
That is quite nice! Biggest fan of this since it's very little typing and applies in way more situations than the OP

@rileytg
Copy link

rileytg commented Apr 15, 2020

@rileytg man readline (sorry for the terse answer but that's the library bash uses and where you will find, in long form, what options are available)

thank you! i didnt realize readline was so foundational to a lot of what i use every day

@szkrd
Copy link

szkrd commented Apr 16, 2020

I like it, it's especially useful if you have spaces in the file (or directory) name (btw the bash cut last word would not work then). Probably I would also flip the conditional and add directory checking:

if [ "$#" -eq 1 ] && ( [ -f "$1" ] || [ -d "$1" ] ); then
  read -ei "$1" newfilename; command mv -v "${1}" "${newfilename}"; return $?
fi
command mv "$@"; return $?

@b3n10
Copy link

b3n10 commented Apr 16, 2020

You can also do Ctrl-W followed by Ctrl-Y after typing the path, if you are using readline style keybindings. Mainstream shells come with readline style bindings by default.

Ctrl-W deletes the previous word for me

@premek
Copy link
Author

premek commented Apr 16, 2020

@szkrd

[...] and add directory checking

-e was what I wanted, not -f. Thanks

@NightMachinery
Copy link

In zsh you need compdef mv=ls, it seems, or the completion breaks.

@fernandezpablo85
Copy link

@premek your snippet is great, short, concise and to the point. Thanks for sharing it.

@collegeimprovements
Copy link

Yeah, many ways to do this but would argue readline's Ctrl-W Ctrl-Y Ctrl-Y is cleanest since it's useful to know anyway and available almost anywhere. :)

Screen Recording 2020-04-13 at 06 43 PM

Excellent.

@zouhair
Copy link

zouhair commented May 4, 2020

There are even more flexible ways (in bash, at least), for example (here renaming .txt to .json):

$ touch config.txt
$ mv config.txt !#:1:s/txt/json

This one eludes me, care to explain how it works?

@christian-oudard
Copy link

I would recommend adding --interactive to the mv commands in the script. As it is now, it is possible to overwrite existing files with no confirmation using this script.

@thecatvoid
Copy link

With the fish shell, you can type Alt-E to edit any command line in your favorite editor where you likely already know shortcuts for copying, pasting and modifying. The great thing is that is a general solution that works for any command line edits.

In bash it is C-x C-e

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment